How to Get Your PS2 to Play Pal Games
- 1). Remove any disc present in the disc tray. Disconnect the PS2 from all power sources.
- 2). Set the PS2 on its side. Use a screwdriver to remove the six screws that hold the casing together. Pull the case off.
- 3). Cover the small, gray cap at the top right of the motherboard with duct tape. Reattach the case and reinsert the screws.
- 4). Open the disc top. At the bottom right corner of the disc tray, there is a small hole that the disc top uses to latch onto when it closes. Fill the hole with a small ball of tissue. Repeatedly open and close the disc top to push the tissue down. Do this until the top can barely lock into place.
- 5). Turn the PS2 on. Examine the PAL game that you want to play. Look to see if it says "DVD-ROM" or "CD-ROM" on the front. Insert the corresponding DVD or CD Swap Magic disc.
- 6). Use the slide tool when prompted onscreen. Insert the PAL game when prompted onscreen.
Source...