If you are deciding to build a shed roof, you need to take into consideration the massive loads the roof structure will take.
A factor which contributes to this is snow.
If you plan carefully, and design and create a firm roof structure, the contents inside your shed will be well protected, and will last for years.
You first step is to purchase a good set of shed plans.
You must then check that the roof construction conforms to your area building codes.
Once you have made sure that you are in the clear, go to your lumber, or wood, specialist, to obtain the roof trusses your require for the shed roof.
Step two involves taking the roof trusses you received, and marking the top plate of the wall every 24" on the center, with a pencil.
Position the trusses of the first mark and nail it into place.
Do the same with the other trusses.
For step three you will need to install 5/8" decking to tie the trusses together.
This helps support the roof loads you may experience.
Install the decking and then cover with asphalt roofing paper and shingles.
An important tip to remember is not to deck the shed roof on a windy day.
The large boards can be caught by the blowing wind, and your roof will be dismantled at the blink of an eye.
Ask a neighbour, family member, or experienced builder for help when working with roof trusses and the decking equipment.
As you may know, snow buildup can reach thousands of pounds, and very solid structures can take heavy strain.
So if you live in an area with heavy snowfall, the best thing for you to do is to make your roof steep up as much as possible.
This will help the snow slide off and not accumulate.
To make you shed match up with your house, buy the same color shingles which your house has.
I would go with a 20 year shingle.
This will make your shed more appealing, and it may be a requirement of your homeowner's association if you live in a community.
I hope this article will help you to build a shed roof, and will make you aware of the many factors involved.