Water jetter is a very effective tool in cleaning and removing blockages from sewer and drainage systems.
But if this tool is not maintained and cleaned regularly, it will not perform its purpose very well.
So be sure to take some time to clean it for it to work properly.
If water jetter is stored in storage for a long time, dust and cobwebs may accumulate on the machine.
Make sure to remove dust particles and other debris off the water jetter.
It is also good to unwind the hose to its full length and clean it thoroughly.
Another area to check is the points of friction on the machine.
Friction can make machine less functional and is very susceptible to wear and tear.
It is good to apply lubrication on the friction parts to make the life of the machine longer.
Also check all other parts if they are positioned properly and if they are properly locked up.
Be sure that each part is securely connected to each other.
If you see some damage on machine's parts, be sure to change it to avoid danger upon usage.
After dusting, cleaning and applying lubrication to the machine, check the hose if there are indications of wear and tear.
If you see some problems on the hose, change it immediately for it can be very dangerous to perform cleaning task with damage hose using high water pressure.
Make sure that the hose is properly installed on the machine so that water can freely run through it.
After doing all the cleaning and checking, try to operate the machine and see if it is working very well.
Be sure follow the safety guide on how to use it.
After using it, put the machine on a safe place where it is far from dust, fire and very high temperature.
If you need some help on your water jetter, you can contact the manufacturer and ask for assistance.
Clean your water jetter regularly for it to do its functions very well.