How to Get the Swingarm Bolt Out of My Banshee
- 1). Spray a generous amount of the penetrating oil onto the swingarm bolt. Let it sit overnight so that the oil can soak deep down into the bolt hole.
- 2). Have your helper hold onto the bolt with the impact or butterfly ratchet and start to push it counter-clockwise. The bolt will not move just yet, but your helper needs to put continuous pressure on the bolt with the impact or butterfly ratchet so that when you go to hit the bolt with the chisel and impact hammer or rivet gun the bolt will start to move.
- 3). Place the pointed chisel into the divot located on the threaded end of the bolt. Drive the chisel into the bolt with the impact hammer or rivet gun. After a few hits, the bolt will start to give. Have your helper turn the bolt counter-clockwise as soon as they can while you continue to hit the bolt with the chisel and impact hammer or rivet gun. Keep hitting the bolt while your helper turns it counter-clockwise until it is punched out of the swing-arm.
Source...