Keeping and maintaining your spas water in pristine condition is not as difficult as it may seem. All is takes is to follow a few simple rules and to learn to understand and use spa chemicals. Even so, there are a few simple steps you can take beyond that to help keep your spas water clean and clear.

Shower Before Entering Your Spa

To begin with, you should always shower before you enter your hot tub. It is the loose dead skin cells that are continually sloughing of of your body that bacteria can process for food. The little time that to takes to shower prior to entering your spa will make a huge difference.

Remember to Change Your Pump Filter

Another thing that you can do is to change your filter often. How often you change your pumps filter should be contingent on how often the spa is used. Make sure to keep a good supply of spare filters handy, so you never run out.

Watch for Phosphates

Phosphates are one type of spa chemical that you don't want in your spa. It gets in by way of swim suits that have been washed with laundry detergent. It turns out that phosphates are a type of plant food and algae thrive when that are in their presence.

Get a Good Spa Chemical Test Kit

Make sure to get a good spa water test kit that you are comfortable using. Some of the most convenient and easy to use are the test kits that use litmus paper or what many people refer to as test strips. To use them you simply dip them in the spa water and check the color change to determine what spa chemicals are needed.

Keep a Good Supply Ready to Use

Also make sure to keep all of your spa chemicals handy and ready to use. The most common spa chemicals contain chlorine but many people don't like the odor of these. If this is your case then you might want to try bromine based spa chemicals that are just as powerful but don't have the odor of chlorine.