How to Replace the Line on a Poulan Pro Link Weed Eater
- 1). Turn the engine upside down and lift up the head. Push the old line back through the exit holes on the head. Grab one end and pull it from the positioning tunnel.
- 2). Insert one end of a .115-inch diameter Poulan Pro line into the hole on the positioning tunnel. Feed the line through until the line's ends are equidistant from the center.
- 3). Thread one end of the line through one of the exit holes on the head. Thread the second line through the opposite exit hole. Pull both tight so that they fully extend through the tunnels.
Source...