Things You'll Need

Instructions

Find and Cut Your Twigs to Size

1

Check your yard or travel to a wooded area for twigs.
2

Use your branch cutters or a saw to cut the twigs to the appropriate lengths.

Make One Side of the Twig Table Frame

1

Pre-drill holes in the cut ends of all 8 side pieces. This will be 16 pre-drilled holes in all.
2

Pre-drill all four table legs 2 inches from the top.
3

Pre-drill all four table legs 2 inches up from the bottom.
4

Align the pre-drilled holes in one leg with one side piece and screw together using the drill.
5

Screw another leg into the other end of the side piece you just attached a leg to.
6

Screw a lower side piece into place on the frame piece you just assembled. This gives you one side of the table.

Make the Second Frame

1

Select one of the unused legs and screw it onto both a top and bottom side piece as you did with the first frame piece.
2

Screw the remaining unused leg to the top and bottom side pieces. This completes the second half of the frame.

Attach the Frames to Each Other

1

Screw the remaining top and bottom side pieces onto one of your pre-made frames at the pre-drilled places.
2

Align the second frame with the ends of the unattached top and bottom side pieces and screw together.

Attach Leg Braces

1

Cut four of your remaining twigs so that they fit in the diagonal between the bottom leg ans the bottom shelf side.
2

Trim the ends on a diagonal and screw in. This adds necessary stability.

Create the Top and Shelf

1

Cut twigs from the extra bundle slightly longer than the table frame top and shelf
2

Attach these using small nails to create the table top and lower shelf.