What is the Best Way to Sterilize the Washing Machine After Washing the Nasty Bathroom Rug?
Washing machine does not always stay clean all the time.
Because we are using detergent and bleach we are deluded into thinking that our machine stays clean all the time.
But if you just washes a nasty bathroom rug, ask yourself where all the germs will go? Your washer may have flushed out all the water used in washing your rug but the bacteria and germs still stay inside.
Here are the things you need to do: Step 1: Clean your washer drum first.
Turn the washer off and remove the plug.
Prepare cleaning materials such as a sponge, baking soda and water.
Step 2: Make paste out of baking soda.
Make sure it has the consistency of batter.
Dip sponge in the paste and use it to slightly slough off dirt from the walls of your washing machine's drum.
Make sure you clean every nook and cranny of the washer tub.
Baking soda is a wonderful natural cleaning agent as it has the ability to effective get rid deep seated dirt and stains.
Step 3: Now plug the washer again and close the tub door.
Turn the washer on and run an empty cool water cycle.
It is important that you use only cool water as the hot water cycle can dissolve baking soda and can clog inside the machine.
The cool water cycle can wash the baking soda paste easily.
Step 4: Once step 3 is finished, you can now start disinfecting your washer.
Prepare white vinegar.
Run an empty hot water cycle this time and add about a cup of white vinegar.
The vinegar will help annihilate any micro organisms thriving in your machine including molds, mildew and mineral deposits.
Step 5: Pause the function for a while so the vinegar solution can work more effectively.
After 5 minutes, resume the cycle and allow the machine to drain off the water.
Step 6: Now run an empty water cycle again, this time to remove the smell of vinegar and any lingering traces of baking soda paste.
Wait for it to finish this cycle and then drain water off completely.
Step 7: Get a clean towel and dry the washer's tub completely.
Make sure not excess moisture is left.
Leave the tub door open so air can penetrate inside and dry the drum completely.
This actually prevents humidity.
Bacteria and other micro organism will most likely live in a humid environment.
Because we are using detergent and bleach we are deluded into thinking that our machine stays clean all the time.
But if you just washes a nasty bathroom rug, ask yourself where all the germs will go? Your washer may have flushed out all the water used in washing your rug but the bacteria and germs still stay inside.
Here are the things you need to do: Step 1: Clean your washer drum first.
Turn the washer off and remove the plug.
Prepare cleaning materials such as a sponge, baking soda and water.
Step 2: Make paste out of baking soda.
Make sure it has the consistency of batter.
Dip sponge in the paste and use it to slightly slough off dirt from the walls of your washing machine's drum.
Make sure you clean every nook and cranny of the washer tub.
Baking soda is a wonderful natural cleaning agent as it has the ability to effective get rid deep seated dirt and stains.
Step 3: Now plug the washer again and close the tub door.
Turn the washer on and run an empty cool water cycle.
It is important that you use only cool water as the hot water cycle can dissolve baking soda and can clog inside the machine.
The cool water cycle can wash the baking soda paste easily.
Step 4: Once step 3 is finished, you can now start disinfecting your washer.
Prepare white vinegar.
Run an empty hot water cycle this time and add about a cup of white vinegar.
The vinegar will help annihilate any micro organisms thriving in your machine including molds, mildew and mineral deposits.
Step 5: Pause the function for a while so the vinegar solution can work more effectively.
After 5 minutes, resume the cycle and allow the machine to drain off the water.
Step 6: Now run an empty water cycle again, this time to remove the smell of vinegar and any lingering traces of baking soda paste.
Wait for it to finish this cycle and then drain water off completely.
Step 7: Get a clean towel and dry the washer's tub completely.
Make sure not excess moisture is left.
Leave the tub door open so air can penetrate inside and dry the drum completely.
This actually prevents humidity.
Bacteria and other micro organism will most likely live in a humid environment.
Source...