If you are one of the thousands of gamers worldwide who are struggling with the PS3 red blinking light of death error, don't worry any longer.
You have come to the right place, because in this article you are going to learn what causes the PS3 flashing red light problem, and what you need to do to fix it yourself.
Keep reading to find out all the answers! To start I'm going to let you in on a little secret; you don't need to send your PS3 back to Sony in order to get the blinking red light of death fixed.
In fact, this is your WORST option for three big reasons: 1.
If your warranty has expired or you never had a warranty to begin with then you can kiss goodbye to $150.
2.
You will have more than a month's gaming "down time", in which you have no PS3 while it is being fixed.
3.
You may not even get your own PS3 returned to you, and could instead wind up losing all your save games and downloaded content.
So what actually causes the PS3 red light of death error? This problem is caused by an error in your hard drive (HDD) connection, or much more infrequently a corruption of the HDD itself.
It is not caused by network connection problems, and overheating is unlikely to be the principal cause either.
In order to fix the PS3 flashing red light of death you need to turn your PS3 off, let it cool down for a few minutes, then remove the HDD from your console.
Check the connector pins for any damage, then carefully re-install the HDD, taking the utmost care possible not to accidentally damage it in the process.
Restart your console, and with any luck it should be working again like new.