Easy Closet DIY
• Firstly, you should begin to plan and determine the space for your easy closet and make your design on a piece of paper.
Utilize the measurement to know how close the shelves must be and how many to be screwed on every wall.
The following step is to make a decision on the type of things to utilize such as opting for a system with pre-fabricated brackets and hangers that hold light wire shelving coated w/ rubber or creating shelving unit closet.
• To construct a wood shelving unit, it's ideal that you utilize BC plywood or for a huge budget project, utilize cabinet grade wood that has a coated top layer.
After, choosing the preferred woods for your shelving, ensure to cut them to the perfect size that you've measured to start hanging its channels.
• By making use of pencil marks you made for identifying your holes, you could start hanging the channels.
It's advisable to utilize a 2 inch screws and the channel should be attached firmly on the wall and ensures the level are vertical.
• After that, you'll be able to see that the foundations are easy to fit in the channels.
Next, arrange the foundations to lay the shelves.
• If you wish to stain or paint the shelving, do it before it's set into place since it'll dry better if it is performed this way.
• Then, it's time for you to put the pole for hang clothes on the shelving.
It's made up of 2 brackets which are mountable at the 2 ends of the pole.
You could attach the brackets or just utilize an extra 2 inch screws.
Make sure that the poles are secured firmly because wet clothing is heavy.
• Then, you should setup the closed bracket, put the pole in the circle and then stick the open bracket below its opposite end.
You should make sure that the pole is short for allowing the bracket to match underneath it.
Mark the right spot of the bracket and then hang the last open bracket.
Then, you could put the pole 1st into the closed bracket and then, put the other end in the cradle made by the 2nd.
• For putting the clothes pole, you should utilize a plastic pole that could be screwed in the wall of your closet.
If you see that the pole is too long, you could just add a pole bracket in the center which is placed to the ledger.
Utilize the measurement to know how close the shelves must be and how many to be screwed on every wall.
The following step is to make a decision on the type of things to utilize such as opting for a system with pre-fabricated brackets and hangers that hold light wire shelving coated w/ rubber or creating shelving unit closet.
• To construct a wood shelving unit, it's ideal that you utilize BC plywood or for a huge budget project, utilize cabinet grade wood that has a coated top layer.
After, choosing the preferred woods for your shelving, ensure to cut them to the perfect size that you've measured to start hanging its channels.
• By making use of pencil marks you made for identifying your holes, you could start hanging the channels.
It's advisable to utilize a 2 inch screws and the channel should be attached firmly on the wall and ensures the level are vertical.
• After that, you'll be able to see that the foundations are easy to fit in the channels.
Next, arrange the foundations to lay the shelves.
• If you wish to stain or paint the shelving, do it before it's set into place since it'll dry better if it is performed this way.
• Then, it's time for you to put the pole for hang clothes on the shelving.
It's made up of 2 brackets which are mountable at the 2 ends of the pole.
You could attach the brackets or just utilize an extra 2 inch screws.
Make sure that the poles are secured firmly because wet clothing is heavy.
• Then, you should setup the closed bracket, put the pole in the circle and then stick the open bracket below its opposite end.
You should make sure that the pole is short for allowing the bracket to match underneath it.
Mark the right spot of the bracket and then hang the last open bracket.
Then, you could put the pole 1st into the closed bracket and then, put the other end in the cradle made by the 2nd.
• For putting the clothes pole, you should utilize a plastic pole that could be screwed in the wall of your closet.
If you see that the pole is too long, you could just add a pole bracket in the center which is placed to the ledger.
Source...