Front Tie Downs

• 1). Secure a track fitting, for one of the tie downs, into the floor plate or track with a power drill. Make sure the fitting is between 3 and 8 inches from the outside of the front wheels.
  
  
• 2). Pull on the fitting to make sure it is properly locked in place and then run the tie down around a solid part of the wheelchair.
  
  
• 3). Attach the tie down by connecting the hook end into the ring opening.
  
  
• 4). Pull the slack on the tie down until it is tight.
  
  
• 5). Repeat the steps 1 through 4 for the tie down on the other side.
  
  

Rear Tie Downs

• 1). Secure a track fitting, for one of the tie downs, into the floor plate or track with a power drill. Make sure the fitting is placed on the inside of the front wheel.
  
  
• 2). Pull on the fitting to make sure it is properly locked in place and then run the tie down around a solid part of the wheelchair.
  
  
• 3). Attach the tie down by connecting the hook end into the ring opening.
  
  
• 4). Open the buckle and pull the slack on the tie down and then close the buckle to apply tension.
  
  
• 5). Repeat the steps 1 through 4 for the tie down on the other side.