How to Use a Tree Pole Trimmer
- 1
Look at your trimmer. A pole tree trimmer should have a pruning saw on the one end and a lopper for small branches mounted underneath it. One side of the lopper is stationary, but the other scissors downward and is controlled by a spring and a rope and pulley mechanism that allows remote operation. This combination will be mounted on a pole, varying between 6 to 12 feet in length with eye bolts along its length to guide the rope used to control the lopper. Longer poles come in two sections so the trimmer can be broken down for easy storage. - 2). Prepare your trimmer and yourself to do a job that takes concentration and care. Be sure that connections are sound and all bolts are tight. Unwind the control rope, and check that it is not tangled or frayed. Wear gloves to avoid rope burn and safety glasses to protect your eyes. If you're trimming out larger branches or working in a place where you can't see very well, like an old, mosquito-infested lilac or overgrown tree, you might want to wear a bike helmet or at least a baseball cap to deflect falling plant material.
- 3). Use the saw for larger branches. Remove branches that rub on others and branches that block light and air from the tree's center. Prune branches broken in storms and branches that have overgrown the basic shape of the tree. Always saw branches the way you hold the trimmer--on a slight vertical angle. Horizontal cuts collect water and insects which can lead to disease. Any time a tree's protective bark is removed, the tree is vulnerable to environmental hazards. So, if possible, seal the cut.
- 4). Use your lopper to thin out little branches or suckers--branches that grow from joints and draw water and nutrients from the branches on either side. Use your loppers to shape trees, too, but make sure that you know what shape (pyramidal, round, columnar) is natural for your tree. If you choose to re-shape your tree, you'll have a continual job to maintain the unnatural shape.
- 5). Maintain your trimmer. Clean and oil your pruning saw after use. With normal use, it should never need sharpening. Keep the lopper clean, too and lubricate the hinge periodically. Keep the rope wound around the pole when not in use so that it stays dry and doesn't present a nuisance. Never store your trimmer standing on its saw. Hang it horizontally on a wall in your shed or garage if possible to keep it handy and away from the damp floor.
Source...