Cut Crown Molding
Crown molding covers a big family of moldings. It is a framework which is used for decorating and giving a classy look to wall at your office or home. Crown molding can turn your simple looking room into a showplace. This is placed at the wall of your home or office where walls touch the ceiling. The other name for crown molding is ‘Conrice'. You can find many kinds of crown molding in the market like moldings made of wood, imber, plastic or form. To Cutting Crown Molding Angles you need concentration, accuracy and exactness. Even a little mistake can result in a poor look.
Tools needed for cutting crown molding:
ü Protractor: A protractor is made up of two plastic pieces that are attached together at on corner. It is an adjustable tool so you can use it for measuring the inside and outside corners.
ü A conversion chart: It takes the angle measurement from protractor and identifies the exact setting needed for miter saw.
ü Compound miter saw: It is a power saw that is used to make complicated angle cuts accuracy and ease.
How to determine the angle of cut:
ü Firstly place each piece of the protractor against a side of the wall.
ü After the protractor is fitted against the wall lock the connected ends of the protractor in place to mark the angle.
ü With the scale on the protractor you can find the exact angle of the corner.
ü At last find the angle on the conversion chart and can determine the needed angle and then can incline for blades of miter saw.
How to make cuts:
ü Measure the length of your wall beginning form one corner to ending at another corner. Not win the measurement.
ü Measure the piece of crown molding corresponding to the size you need as per the measure of your wall length. It should be cut at 45 degree angle to exactly fit together.
ü Mark the crown molding where you want or plan to make the cut. This mark should show the location of the long point of 45degree angle.
ü Adjust miter saw to create cuts at suitable and appropriate angle.
ü Take first piece of crown molding to create cut. Fit molding in miter saw upside down and backward with the angled face of crown molding pressed against the miter saw table.
ü With the help of miter saw cut the crown molding at appropriate and suitable angle.
ü Lastly test the molding before Install Crown Molding to make sure that you cut it right.
ü If you find it right then install it and give beautiful look to your walls.
For more details visit: www.cutncrown.com/easy_as_1_2_3.php
Tools needed for cutting crown molding:
ü Protractor: A protractor is made up of two plastic pieces that are attached together at on corner. It is an adjustable tool so you can use it for measuring the inside and outside corners.
ü A conversion chart: It takes the angle measurement from protractor and identifies the exact setting needed for miter saw.
ü Compound miter saw: It is a power saw that is used to make complicated angle cuts accuracy and ease.
How to determine the angle of cut:
ü Firstly place each piece of the protractor against a side of the wall.
ü After the protractor is fitted against the wall lock the connected ends of the protractor in place to mark the angle.
ü With the scale on the protractor you can find the exact angle of the corner.
ü At last find the angle on the conversion chart and can determine the needed angle and then can incline for blades of miter saw.
How to make cuts:
ü Measure the length of your wall beginning form one corner to ending at another corner. Not win the measurement.
ü Measure the piece of crown molding corresponding to the size you need as per the measure of your wall length. It should be cut at 45 degree angle to exactly fit together.
ü Mark the crown molding where you want or plan to make the cut. This mark should show the location of the long point of 45degree angle.
ü Adjust miter saw to create cuts at suitable and appropriate angle.
ü Take first piece of crown molding to create cut. Fit molding in miter saw upside down and backward with the angled face of crown molding pressed against the miter saw table.
ü With the help of miter saw cut the crown molding at appropriate and suitable angle.
ü Lastly test the molding before Install Crown Molding to make sure that you cut it right.
ü If you find it right then install it and give beautiful look to your walls.
For more details visit: www.cutncrown.com/easy_as_1_2_3.php
Source...