How to Fix an Xbox 360 Hard Drive
- 1). Remove the current hard drive. To do this properly, turn the Xbox 360 console off first. Remove the cover panel from the top of the Xbox. Pull the hard drive directly out. Reinsert it firmly into the hard drive bay, while taking care not to bend the connector pins. Turn the Xbox 360 back on and check to see if the system recognizes the drive.
- 2). Turn off the console and remove the hard drive again, if Step 1 does not work. With the drive removed from the Xbox 360, turn the system on for several seconds and power it off again. Insert the hard drive firmly into the bay again. Turn your system back on and check for functionality.
- 3). Try inserting the hard drive in a different Xbox 360 console if you have one available to you and the previous two steps did not yield results. It is possible that the problem could be originating from the console itself and not the hard drive. It is important to diagnose the issue precisely before continuing. If the hard drive works normally in a different console, you will need to have your console serviced.
- 4). Reinstall the firmware included on your Xbox 360 hard drive. This firmware is what tells the console that the drive is indeed a viable Xbox 360 hard drive, and it is possible that it has been corrupted. Connect your Xbox hard drive to your computer's SATA port, download the proper firmware from Microsoft's website and install it on the hard drive.
- 5). Insert the drive back into your Xbox after installing the new firmware. If it still does not work, you will need to have the hard drive serviced by a certified professional or replaced completely.
Source...