How Do You Choose the Best System for Waterproofing a Basement? There are three basic types of systems used in waterproofing a basement.
When looking for the most appropriate system to use for your basement, it is essential for you to look at various factors and consider them carefully.
For instance, the age of the building, the type of leakage or water that plays as the main problem, the infrastructures surrounding your property as well as the environmental conditions in your area can all pass as determining factors as you shape your decision.
Basically, a basement is developed when the infrastructure's foundation is seen to have the potential of being a usable space.
Basements are very common among residential properties, especially those that are located in places with cold climates.
Given that basements are commonly found in such areas, this part of the house is the one that needs to be waterproofed the most.
As you read through, you should have already gathered some basic info and tips to help you come up with a decision and solution as you go on with your plan of waterproofing your basement.
Generally, a chemical preparation, particularly an interior sealant, is applied to the concrete walls or masonry of the basement.
This is applied from the inside.
This type of system used for waterproofing in basement is highly recommended for locations with high humidity levels.
The formation and accumulation of humidity in a concrete basement is most likely to result in wet or moist walls that seem to sweat.
This then degrades the quality and strength of the walls and makes for great breeding grounds for molds and mildew.
If the problem comes from water directly inflowing to the basement through the walls itself, you are given two options: exterior or interior water drainage.
Interior basement drainage is typically less costly than exterior drainage systems.
Most home and property owners first opt to make use of the interior drainage system first and if it proves to be insufficient in fully waterproofing the basement, they may also eventually go for the exterior basement drainage system.
In an interior basement drainage system, the water from the underground is drained.
This is done with the use of either a trench or a direct pipe that gathers the water before it can actually reach the home.
Meanwhile, a sump pump system will pull the water up.
The pump is basically electrically powered which can be created to work when the water reaches a particular level.
Some may also work every time there is water in the area.