How to Patch a Banzai Water Slide
- 1). Turn off the hose and unplug the blower, so the slide deflates.
- 2). Clean the area around the hole with a mild soap and water to ensure the patch sticks to the surface of the slide. Dry the area before continuing.
- 3). Cut a circle out of the supplied repair patch that is approximately 1/2-half inch larger than the size of the hole. A patch shaped with sharp corners, such as a square or rectangle, is more likely to peel off the water slide.
- 4). Apply vinyl adhesive to the back of the patch and spread an even coating to the edges.
- 5). Press the patch over the hole and smooth it with your hand. Allow the adhesive to dry for at least 20 minutes before inflating the water slide again.
Source...