Cleaning is healthy way to living
Tankless Water Heaters, are also known as Instantaneous or Demand Water Heaters,which provide hot water only when it is needed. With today's rising energy costs and environmental awareness in mind, these Heaters have met and exceeded the expectations of home and business owners for new water heating solutions. A properly installed and maintained heater can provide hot water for up to 25 years.
The most common enemy of a tankless water heater is hard water which contains high mineral concentration of calcium and magnesium ions. These deposits cause hard scaly buildup on the heating units. For proper maintenance of most water heaters involves flushing the system regularly to remove hard water deposits such as calcium from the unit. Before touching, one needs to turn off the power supply to the unit at the circuit box and lock out the circuit if possible to avoid any kind of mishap.
To clean the tankless water heater it is required to circulate white vinegar through out the unit with the utility pump. But before doing so one requires to shut both hot and cold water valves on the pipes leading to the water heater. A bucket should be placed beneath the unit, then the drain caps should be opened and the entire unit should be drained out. Once it is empty,one has to make sure the rubber washers are still in place. If not, check in the bucket. Empty the bucket.Connect one hose from the cold water inlet on the heater to the outlet side of the pump. then connect a second hose to the inlet side of the pump and let the loose end rest in the first bucket. Attach the third hose to the hot water inlet on the tank and let is rest in the second bucket.Pour the white vinegar into first bucket, the one with the hose attached to the inlet side of the pump. Plug in the pump -- and turn it on if it has a separate on/off switch. The pump will pick up vinegar and pump it into your heater. It will cycle through the heater and empty through the hose lying in the second bucket.
After a few minutes of cycling the vinegar begins to turn cloudy. That is evidence that the calcium and other minerals built-up in the heater are being dissolved. When the first bucket is nearly empty of vinegar, turn off the pump. At this point, you can pour all the vinegar into one bucket and put both loose ends of the hoses in it. Turn the pump back on and let the vinegar cycle for 40-60 minutes.A tankless water heater annual cleaning is an affordable way to extend its life and keep it running efficiently.
The most common enemy of a tankless water heater is hard water which contains high mineral concentration of calcium and magnesium ions. These deposits cause hard scaly buildup on the heating units. For proper maintenance of most water heaters involves flushing the system regularly to remove hard water deposits such as calcium from the unit. Before touching, one needs to turn off the power supply to the unit at the circuit box and lock out the circuit if possible to avoid any kind of mishap.
To clean the tankless water heater it is required to circulate white vinegar through out the unit with the utility pump. But before doing so one requires to shut both hot and cold water valves on the pipes leading to the water heater. A bucket should be placed beneath the unit, then the drain caps should be opened and the entire unit should be drained out. Once it is empty,one has to make sure the rubber washers are still in place. If not, check in the bucket. Empty the bucket.Connect one hose from the cold water inlet on the heater to the outlet side of the pump. then connect a second hose to the inlet side of the pump and let the loose end rest in the first bucket. Attach the third hose to the hot water inlet on the tank and let is rest in the second bucket.Pour the white vinegar into first bucket, the one with the hose attached to the inlet side of the pump. Plug in the pump -- and turn it on if it has a separate on/off switch. The pump will pick up vinegar and pump it into your heater. It will cycle through the heater and empty through the hose lying in the second bucket.
After a few minutes of cycling the vinegar begins to turn cloudy. That is evidence that the calcium and other minerals built-up in the heater are being dissolved. When the first bucket is nearly empty of vinegar, turn off the pump. At this point, you can pour all the vinegar into one bucket and put both loose ends of the hoses in it. Turn the pump back on and let the vinegar cycle for 40-60 minutes.A tankless water heater annual cleaning is an affordable way to extend its life and keep it running efficiently.
Source...