Bullet Nerf Bar Install Instructions
- 1). Lay down on the creeper and use your feet and legs to move it around.
- 2). Locate the body mount bolts on the underside of the vehicle frame on the driver side of the vehicle.
- 3). Remove the body mount bolts with the socket wrench. There will be two or three bolts that you will need to remove.
- 4). Pull out the bolt and remove the rubber frame mount.
- 5). Insert the bolt through the mounting hardware for the Nerf bar and the rubber frame mount.
- 6). Insert the bolt with the mounting hardware back into the vehicle frame. Tighten the bolt with the socket wrench.
- 7). Place one end of the Nerf Bar into the mount at the front of the vehicle.
- 8). Insert the mounting bolt into the back of the Nerf Bar and hand-tighten the bolt.
- 9). Place the other end of the Nerf Bar into the mount at the rear of the vehicle and repeat step 8.
- 10
Tighten all of the mounting bolts securely with the socket wrench. - 11
Repeat this process for the Nerf Bar on the passenger side of the vehicle.
Source...