Driveway Repair and Restoration: A Guide to Asphalt
The sun is harsh on asphalt driveways and so are the other elements like snow.
In addition, daily wear and tear isn't exactly helping.
However, with a few products and some knowledge of driveway repair and restoration, you'll have one that looks good and lasts a lifetime! Repairing Cracks You may need to fix a crack many years after you seal the driveway, but you also need to do it beforehand.
For driveway repair and restoration of small cracks, use pourable crack filler.
You'll need to remove all the dirt and plants first.
You can use a wire brush to remove all the dirt.
Next, you should use a garden hose to get out any debris that may have remained.
Make sure where you park your car dries before you begin filling the cracks.
Shake the bottle prior to pouring it, then cut the top of the bottle.
Squeeze the tube to fill the crack.
Use the tool that comes with the solution to even out the filler.
While it's drying, it soaks into the crack.
Because of this, you may need a second coat.
Don't walk or drive on this area for 24 to 48 hours after applying it.
A larger crack will need stone grade crack filler.
You'll need to start by removing debris from the crack.
Use the filler tool to get the crack filler out of the container, and then apply it to the crack.
Next, use the tool to push the material into the crack.
Make sure the entire crack has been filled.
With this material for driveway repair and restoration, you can drive or walk on it immediately.
Sealing You need to seal it as part of the driveway repair and restoration process.
You can purchase one that doesn't require any mixing to make the process a bit easier.
You'll want to make any repairs first.
It's best to wait at least six months after mending to apply the sealant.
It needs to be completely dry to apply sealer, so wait a day or two after it rains.
Make sure it's at least 60 degrees Fahrenheit outside.
Tape off any area that you don't want sealed, such as bricks or gutters.
When doing the edges, use a dry brush to put the sealer on.
After opening the sealer, pour it from one side of the pavement to the other.
You'll want to start at your garage.
Use the tool to spread the sealer thinly across the entire area you're sealing.
Once the sealant has been applied, you should allow 24 to 48 hours before you resume driving on it.
After your driveway repair and restoration, you can rest assured that it will be in good condition for years to come!
In addition, daily wear and tear isn't exactly helping.
However, with a few products and some knowledge of driveway repair and restoration, you'll have one that looks good and lasts a lifetime! Repairing Cracks You may need to fix a crack many years after you seal the driveway, but you also need to do it beforehand.
For driveway repair and restoration of small cracks, use pourable crack filler.
You'll need to remove all the dirt and plants first.
You can use a wire brush to remove all the dirt.
Next, you should use a garden hose to get out any debris that may have remained.
Make sure where you park your car dries before you begin filling the cracks.
Shake the bottle prior to pouring it, then cut the top of the bottle.
Squeeze the tube to fill the crack.
Use the tool that comes with the solution to even out the filler.
While it's drying, it soaks into the crack.
Because of this, you may need a second coat.
Don't walk or drive on this area for 24 to 48 hours after applying it.
A larger crack will need stone grade crack filler.
You'll need to start by removing debris from the crack.
Use the filler tool to get the crack filler out of the container, and then apply it to the crack.
Next, use the tool to push the material into the crack.
Make sure the entire crack has been filled.
With this material for driveway repair and restoration, you can drive or walk on it immediately.
Sealing You need to seal it as part of the driveway repair and restoration process.
You can purchase one that doesn't require any mixing to make the process a bit easier.
You'll want to make any repairs first.
It's best to wait at least six months after mending to apply the sealant.
It needs to be completely dry to apply sealer, so wait a day or two after it rains.
Make sure it's at least 60 degrees Fahrenheit outside.
Tape off any area that you don't want sealed, such as bricks or gutters.
When doing the edges, use a dry brush to put the sealer on.
After opening the sealer, pour it from one side of the pavement to the other.
You'll want to start at your garage.
Use the tool to spread the sealer thinly across the entire area you're sealing.
Once the sealant has been applied, you should allow 24 to 48 hours before you resume driving on it.
After your driveway repair and restoration, you can rest assured that it will be in good condition for years to come!
Source...