Installation of UM ATV Nerf Bars
- 1). Park your ATV on a flat surface where you can access the vehicle from the side.
- 2). Slide the nerf bars underneath the ATV, with the bar ends to the front.
- 3). Slide the bar ends of the nerf bars through the lower frame and press the bars into one another. Secure them with the clip provided.
- 4). Lift the rear of the nerf bars and line up the bolt holes with the pre-drilled holes on the rear frame.
- 5). Use a 12 mm socket wrench to tighten down the bolts until the nerf bars are snug against the ATV's frame.
Source...