There are many motorcyclist that find the annoying struggle while fueling up at the gas pump.
In most cases the pumps at the local stations are designed for the four wheel auto gas vehicle and also the shut off valve was designed accordingly.
Whenever you try to fill up some gas, its safety shut off valve will engage only when the tank is partially filled up.
Here is the best way to fill your motorcycle tank.
After you pull to the station just put up the bike on its kick stand.
In many cases the manufacturers will recommend that by filling up the bike tanks with gas while it is up on the kick stand will put the tank in an optical position.
This can make is easier to pump gas into the bikes.
Now just pay so to activate the gas pump, then after that just put the nozzle as far as you can in the fuel door.
You can then begin to pump gas right into the motorcycle until its safety valve shuts off as then the pumping stops and this is a safe and effective way to put gas in the tank of your bike.
Now pull this nozzle from out from the motorcycles fuel door and hold onto the handle of the nozzle and then just trigger it with one hand.
With the other hand you will pull back the rubber sleeve that surrounds this nozzle.
Pushing the sleeve back will block the shut off valve from ever reengaging.
Now be sure to stick the end of this nozzle one inch in the bikes fuel entrance and then continue fueling the motorcycle.
You shall have the ability to see the fuel level begin to rise just by looking into the gaps of the door.
After the level of fuel reaches the top then stop the pump.
Put back the nozzle and close your fuel door to the motorcycle.