The Responsible Pond Owner Uses Pond Filters
There is nothing that one could add to their home that would make it more beautiful than a fish pond. When built correctly, these can add an elegance to a garden setting and complete an extraordinary landscape feature. These ponds must be maintained to retain their attractive appearance so there is certain equipment that is needed. Among these are pond filters.
These filters need to be installed when the pond is being built. There are instructions on the Internet for digging the right ditches to install them correctly. They will assist in keeping the debris and other things under control and keep it looking clean and healthy. This is also a part of keeping algae under control.
These filters come in three different versions. There are the mechanical, the UV (ultraviolet) and the biological filters. Each uses different mechanisms and it should be determined exactly what will fit in with one's arrangement. If in doubt as to which one will fit with the pond this can be checked out online or with a landscape architect.
The mechanical filter is very simply made and uses a pump to push the water through a filter. This stops the debris and dirt, allowing the water to continue. It must be cleaned on a regular basis, as it will become jammed with these materials.
The UV(ultraviolet) filter emits the same radiation as is found in sunlight. It is often used to get rid of algae as well as kill microorganisms. This filter has a glass like sleeve which must be removed and cleaned when it becomes covered with pond elements. It can be usually be just wiped off with a paper towel. In cases when there is a hard covering a vinegar soaked cloth will usually do the trick. This filter is not effective with string algae.
The biological filter works in two ways. It kills microorganisms, which may be dangerous, and promotes the growth of good bacteria. This type of filter usually takes 2 to 4 weeks to be effective. It has been suggested that the best way to go is to combine two of these filters to obtain good results.
If one does not keep the pond clean and in a healthy condition it will become full of algae and the fish can die. Filters are just that. They filter leaves and other debris, as well as toxic chemicals, which can bring in foreign elements that cause many of the problems people have with these units.
The water can become toxic by fish waste and other components. That is why it is so important to keep the water clear and healthy at all times. Many people have lost expensive fish because of letting their pond get in this condition. Filters will assist in preventing this from happening. Having such a beautiful pond in one's yard adds to its ecstatic beauty and is a pleasure to enjoy. Being able to sit in quiet surroundings and watch the fish swim lazily about brings a sense of peace and contentment. It is a great relief from the stress of the busy day world.
These filters need to be installed when the pond is being built. There are instructions on the Internet for digging the right ditches to install them correctly. They will assist in keeping the debris and other things under control and keep it looking clean and healthy. This is also a part of keeping algae under control.
These filters come in three different versions. There are the mechanical, the UV (ultraviolet) and the biological filters. Each uses different mechanisms and it should be determined exactly what will fit in with one's arrangement. If in doubt as to which one will fit with the pond this can be checked out online or with a landscape architect.
The mechanical filter is very simply made and uses a pump to push the water through a filter. This stops the debris and dirt, allowing the water to continue. It must be cleaned on a regular basis, as it will become jammed with these materials.
The UV(ultraviolet) filter emits the same radiation as is found in sunlight. It is often used to get rid of algae as well as kill microorganisms. This filter has a glass like sleeve which must be removed and cleaned when it becomes covered with pond elements. It can be usually be just wiped off with a paper towel. In cases when there is a hard covering a vinegar soaked cloth will usually do the trick. This filter is not effective with string algae.
The biological filter works in two ways. It kills microorganisms, which may be dangerous, and promotes the growth of good bacteria. This type of filter usually takes 2 to 4 weeks to be effective. It has been suggested that the best way to go is to combine two of these filters to obtain good results.
If one does not keep the pond clean and in a healthy condition it will become full of algae and the fish can die. Filters are just that. They filter leaves and other debris, as well as toxic chemicals, which can bring in foreign elements that cause many of the problems people have with these units.
The water can become toxic by fish waste and other components. That is why it is so important to keep the water clear and healthy at all times. Many people have lost expensive fish because of letting their pond get in this condition. Filters will assist in preventing this from happening. Having such a beautiful pond in one's yard adds to its ecstatic beauty and is a pleasure to enjoy. Being able to sit in quiet surroundings and watch the fish swim lazily about brings a sense of peace and contentment. It is a great relief from the stress of the busy day world.
Source...