Sony Info Lithium Camcorder Batteries
Most camcorders use batteries that are rechargeable, because of the amount of power they consume. Sony's InfoLithium camcorder batters retain a charge longer than regular camcorder batteries because of the Lithium inside of them. When the batteries on your camcorder run out of power, you will need to recharge them in order to use it again.
Place the InfoLithium battery inside your Sony Camcorder. Or, if the camcorder cannot charge batteries or the camcorder isn't available, place the batteries in the charger. Be sure to place the batteries in the position showed on the battery charger or camcorder.
Plug the camcorder or charging device into a power outlet. Note any lights or LEDs that appear on the charger or camcorder. This indicates whether or not the batteries are charging.
Remove the SONY BP L40 Battery when the light changes from blinking to solid or if it changes colors. This signifies that the recharging is complete.
Always keep a spare set of batteries handy for an emergency.
Let your batteries completely run out before recharging to ensure maximum life for your battery.
How to Use the InfoLithium Battery Pack
The InfoLithium battery pack is a high-technology battery made by Sony used to power cameras and other electronically operated camera accessories. It is a lithium-ion battery that has the ability to monitor power consumption and can tell you accurately, via the display on the camera, how much recording time is left. An InfoLithium SONY BP-L60 Battery stores at least twice the energy of regular nickel-based batteries, can be charged in about an hour or so and, because it monitors usage, you always know in advance when to recharge the battery back.
Open the InfoLithium battery pack cover on your device. Either press the clip on the side of the cover using your fingers and flip it open, or slide the cover so it unclips, then lift off the cover using your fingers.
Insert the InfoLithium battery pack into the battery compartment. It only fits one way so you can't get it wrong.
Replace or close the SONY BP-L90 Battery pack cover. Press the cover into place until it clicks shut, or slide the cover into place until it clicks.
Turn on your device. Wait while the display loads up information from your InfoLithium battery. The display automatically tells you the amount of power in the battery and the number of pictures you can take, or amount of recording time available.
Use your device. The screen constantly updates information from the battery so you always know the power level and time left.
Place the InfoLithium battery inside your Sony Camcorder. Or, if the camcorder cannot charge batteries or the camcorder isn't available, place the batteries in the charger. Be sure to place the batteries in the position showed on the battery charger or camcorder.
Plug the camcorder or charging device into a power outlet. Note any lights or LEDs that appear on the charger or camcorder. This indicates whether or not the batteries are charging.
Remove the SONY BP L40 Battery when the light changes from blinking to solid or if it changes colors. This signifies that the recharging is complete.
Always keep a spare set of batteries handy for an emergency.
Let your batteries completely run out before recharging to ensure maximum life for your battery.
How to Use the InfoLithium Battery Pack
The InfoLithium battery pack is a high-technology battery made by Sony used to power cameras and other electronically operated camera accessories. It is a lithium-ion battery that has the ability to monitor power consumption and can tell you accurately, via the display on the camera, how much recording time is left. An InfoLithium SONY BP-L60 Battery stores at least twice the energy of regular nickel-based batteries, can be charged in about an hour or so and, because it monitors usage, you always know in advance when to recharge the battery back.
Open the InfoLithium battery pack cover on your device. Either press the clip on the side of the cover using your fingers and flip it open, or slide the cover so it unclips, then lift off the cover using your fingers.
Insert the InfoLithium battery pack into the battery compartment. It only fits one way so you can't get it wrong.
Replace or close the SONY BP-L90 Battery pack cover. Press the cover into place until it clicks shut, or slide the cover into place until it clicks.
Turn on your device. Wait while the display loads up information from your InfoLithium battery. The display automatically tells you the amount of power in the battery and the number of pictures you can take, or amount of recording time available.
Use your device. The screen constantly updates information from the battery so you always know the power level and time left.
Source...