Build a Home Made Wind Turbine - Learn How Easy it Can Be
Windmills won't work everywhere, so when you are thinking about making your own home made wind turbine be sure it works in your location.
If you have a consistent breeze you could create a wind turbine the will generate a small amount of electricity, that will be enough to just decrease your power bill.
You could make a home made wind turbine for a weekend project, since it will not take long.
Should you bother with building a home made wind turbine? Here are the top two benefits to creating your own home wind power, decreasing your electricity bills and doing your part to save the environment.
Below you will find the most important benefit to creating your own windmill at home.
You could just buy a wind power system if you really did want to make one.
You could spend more 10,000 dollars just to buy a wind turbine system.
The best thing that you can do it make your own windmill with that money, which you will save even more.
Now you see why it is better make your own windmill system, it will cost a fraction of the price you would pay to order one.
The best part is all you need is a plan that will help you with the making.
Here are some basic steps that you could use to build a home made wind turbine unit: 1.
Take the propellers off the flower.
With the propeller of, it will be used to spin the axle.
Use a propeller from a larger pinwheel floor will work the best.
2.
Place the spools between the plastic sheets and then glue them on.
Place the small spools at the corner of the plastic sheet.
Super glue will work the best here, once super glued let it dry.
This will serve as the casing for the wind turbine generator.
3.
Be sure to measure the metal rod before you drill holes into the plastic.
The hole that you drilled will be just for the metal rod.
Be sure that the hole is perfectly aligned on both sides of the sheet.
Then after the holes are perfectly aligned place the metal rod through them.
4.
Put the magnets in the casing.
Make sure they have enough space for them to rotate freely around the axle that will be spinning the magnets.
Attach the magnets together with spacers.
If you see that you don't have enough room between the spacers to insert the axle, then the magnet will not work to generate electric current when the axle spins.
If you have a consistent breeze you could create a wind turbine the will generate a small amount of electricity, that will be enough to just decrease your power bill.
You could make a home made wind turbine for a weekend project, since it will not take long.
Should you bother with building a home made wind turbine? Here are the top two benefits to creating your own home wind power, decreasing your electricity bills and doing your part to save the environment.
Below you will find the most important benefit to creating your own windmill at home.
You could just buy a wind power system if you really did want to make one.
You could spend more 10,000 dollars just to buy a wind turbine system.
The best thing that you can do it make your own windmill with that money, which you will save even more.
Now you see why it is better make your own windmill system, it will cost a fraction of the price you would pay to order one.
The best part is all you need is a plan that will help you with the making.
Here are some basic steps that you could use to build a home made wind turbine unit: 1.
Take the propellers off the flower.
With the propeller of, it will be used to spin the axle.
Use a propeller from a larger pinwheel floor will work the best.
2.
Place the spools between the plastic sheets and then glue them on.
Place the small spools at the corner of the plastic sheet.
Super glue will work the best here, once super glued let it dry.
This will serve as the casing for the wind turbine generator.
3.
Be sure to measure the metal rod before you drill holes into the plastic.
The hole that you drilled will be just for the metal rod.
Be sure that the hole is perfectly aligned on both sides of the sheet.
Then after the holes are perfectly aligned place the metal rod through them.
4.
Put the magnets in the casing.
Make sure they have enough space for them to rotate freely around the axle that will be spinning the magnets.
Attach the magnets together with spacers.
If you see that you don't have enough room between the spacers to insert the axle, then the magnet will not work to generate electric current when the axle spins.
Source...