The Best Way to Remove Rust From Firearms
- 1). Apply a liberal amount of powder solvent to a cleaning patch. Rub the patch across any metal surfaces of the firearm where rust may be forming. Use a clean patch to wipe excess solvent from the surface. Inspect the area and repeat if necessary.
- 2). Determine if the solvent removed the rust. If not, apply a small amount of nonabrasive metal polish to a cleaning patch. Rub the polish in a straight back and forth motion in line with the stock and barrel. Do not rub the polish up and down or in a circular motion.
- 3). Remove the rust and polish with powder solvent on a cleaning patch. Inspect the surface and determine if the polish is helping to remove the rust. If so, you may want to apply more polish and continue working the rust from the metal.
- 4). Use a 0000 fine steel wool pad if the solvent or polish is not effective. Apply gun oil to the steel wool and rub the rusted area in a straight line as before. Do not swirl or move the steel wool up and down on the firearm's metal surface.
- 5). Wipe the area clean with solvent on a cleaning patch. Apply a light coat of oil to all metal parts of the firearm to make sure any finger prints or moisture are removed.
Source...