Make Your Floors Shine Like Mirrors
If you are renovating your house, the floor sanding and polishing should be the last task on your list because if you decide to do it first or in between, it might get damaged and you will have to repeat the entire process again which can turn out to be expensive. While the renovation is in progress workers will be moving all around the house moving stuff from one room to another. Spilling and scratching is commonplace in such an atmosphere and it is advisable not to put your floor on risk and keep the floor polishing and sanding for the last. Clean and sparkling floors are a treat to the eyes and make the house owner proud. Over the time, due to constant wear and tear the floor starts to look dull and lackluster.
This is when you know it that it is time to polish the floors. Depending upon the area your contractor will be able to give you an estimate of cost and time it would take to complete the job. There are various agencies for Floor Polishing Sydney residents use. Depending upon your budget and time available you can use any one of them. Floors are made of various materials like timber, cork, particleboard etc. First the floor is prepared, then sanded and then coated with a sealant to get that picture perfect finish. There are sanding machines to do this job to perfection.
To prepare the floor for sanding all nails are hammered properly into the boards as they can damage the machine. After the sanding is done, it is coated with a sealant. When the sealant is dry, the floor is ready for polishing. It is a tedious exercise and may take a few days to get the perfect result, however once it is done; it is bound to make you happy. Floor Sanding And Polishing requires highly skilled workers because it entails handling of certain hazardous chemicals. Therefore, one should go for experts in floor polishing Sydney residents trust to get excellent results. There are certain things to be kept in mind before going in for this job. Sanding removes most of the top layer of the flooring and the new color of the wood may not be exactly like your old floor or it may expose the inside of your timber floor which might be eaten by the worms and require a replacement. Also as a considerable layer of the timber is removed each time it might decrease the life of your timber board.
This is when you know it that it is time to polish the floors. Depending upon the area your contractor will be able to give you an estimate of cost and time it would take to complete the job. There are various agencies for Floor Polishing Sydney residents use. Depending upon your budget and time available you can use any one of them. Floors are made of various materials like timber, cork, particleboard etc. First the floor is prepared, then sanded and then coated with a sealant to get that picture perfect finish. There are sanding machines to do this job to perfection.
To prepare the floor for sanding all nails are hammered properly into the boards as they can damage the machine. After the sanding is done, it is coated with a sealant. When the sealant is dry, the floor is ready for polishing. It is a tedious exercise and may take a few days to get the perfect result, however once it is done; it is bound to make you happy. Floor Sanding And Polishing requires highly skilled workers because it entails handling of certain hazardous chemicals. Therefore, one should go for experts in floor polishing Sydney residents trust to get excellent results. There are certain things to be kept in mind before going in for this job. Sanding removes most of the top layer of the flooring and the new color of the wood may not be exactly like your old floor or it may expose the inside of your timber floor which might be eaten by the worms and require a replacement. Also as a considerable layer of the timber is removed each time it might decrease the life of your timber board.
Source...