How To Fix Cracks in My Outdoor Chimenea
- 1). Clean away any loose bits of pottery from the crack with the steel brush. Use the brush carefully so that you do not remove too much fresh terracotta.
- 2). Mix the two parts of the epoxy on wax paper with the craft stick. Mix only as much as you think you will need. You can mix more epoxy. However, once the epoxy is mixed, any unused adhesive must be discarded.
- 3). Spread the epoxy in the crack with the wooden craft stick. Allow the epoxy to dry as long as the instructions of your specific epoxy recommend.
- 4). Sand the epoxy flat against the surface of the chiminea.
Source...