Want Tires of Your Truck to Carry Heavy Loads? Make Sure it is Distributed Properly
You must have noticed weightlifters lifting weights in excess of their body weight.
If you are asked to lift a weight that has been conveniently attached to the end of a strong and firm rod, you too might be in a position to lift it to a certain height.
On the other hand, if it is simply dumped and if you are expected to lift it without any assistance whatsoever, you would find it difficult.
The same is the case with trucks as well.
The over all capacity of the truck may run into many tons.
However, if you do not distribute the weight properly, it is obvious that performance of your vehicle is going to suffer.
Many truck owners make the mistake of dumping the stuff to be transported inside their vehicle instead of arranging it properly.
The end result is that distribution of weight is never even.
This is not just a question of aesthetics.
It is also question of performance.
If somebody sits on your back, you may be in a position to lift them up without any difficulty.
However, somebody sits on your legs; you may not be in a position to lift the same weight.
In the same way, if you dump excessive weight at the rear of the truck and if you do not distribute the weight properly, the rear tires are going to suffer excess load while the front tires will not suffer any load whatsoever.
The end result is that the rear tires will be damaged quickly while the front tires will be in good condition.
When you are forced to replace the rear tires, you would be stuck in a difficult position as you would not know what to do with the tires fitted to the front portion.
Until and unless you rectify the mistake, this complication is going to continue and lead too many problems.
How should you outcome the problem? If you have a pair of tires that are highly or excessively damaged and if you have another pair that is in good condition, you should find ways to dispose all the four tires at once.
You should replace all the tires so that you start with a brand new set.
Secondly, you should focus on distributing the weight properly so that you have a clear idea of how much weight the truck is carrying and the manner in which it is being carried.
If you are asked to lift a weight that has been conveniently attached to the end of a strong and firm rod, you too might be in a position to lift it to a certain height.
On the other hand, if it is simply dumped and if you are expected to lift it without any assistance whatsoever, you would find it difficult.
The same is the case with trucks as well.
The over all capacity of the truck may run into many tons.
However, if you do not distribute the weight properly, it is obvious that performance of your vehicle is going to suffer.
Many truck owners make the mistake of dumping the stuff to be transported inside their vehicle instead of arranging it properly.
The end result is that distribution of weight is never even.
This is not just a question of aesthetics.
It is also question of performance.
If somebody sits on your back, you may be in a position to lift them up without any difficulty.
However, somebody sits on your legs; you may not be in a position to lift the same weight.
In the same way, if you dump excessive weight at the rear of the truck and if you do not distribute the weight properly, the rear tires are going to suffer excess load while the front tires will not suffer any load whatsoever.
The end result is that the rear tires will be damaged quickly while the front tires will be in good condition.
When you are forced to replace the rear tires, you would be stuck in a difficult position as you would not know what to do with the tires fitted to the front portion.
Until and unless you rectify the mistake, this complication is going to continue and lead too many problems.
How should you outcome the problem? If you have a pair of tires that are highly or excessively damaged and if you have another pair that is in good condition, you should find ways to dispose all the four tires at once.
You should replace all the tires so that you start with a brand new set.
Secondly, you should focus on distributing the weight properly so that you have a clear idea of how much weight the truck is carrying and the manner in which it is being carried.
Source...