How to Replace a commode seal
- 1). Go to the hardware store and pick up a Wax seal for the commode.
- 2). Turn water supply to commode , OFF.
Flush and remove all water from inside commode. - 3). With plyers , gently remove the bolts from at the base of the commode.
- 4). This step may require some help.
Lift the commode straight up and set aside. - 5). Remove old seal. With putty knife scrape clean any remaining wax.
- 6). Place new seal into place.
Slide the bolts into holes in the side of the plastic gasket. - 7). Once again you may need someone to help.
Carefuly place the commode back over the seal , lining the holes to the bolts. - 8). Once it is in place you will need to tighten the bolts.
becareful not to over tighten. It is very easy to break the commode. - 9). ENJOY
Source...