How to Remove Polyester Resin
- 1). Put on a vapor respirator, safety goggles and latex gloves, if you are not already wearing protective gear. Make sure that your work area is well-ventilated.
- 2). Take a clean rag and wipe away as much of the polyester resin as you can while it is still wet. Do not spread the resin to other surfaces. Put the rag in a safe place away from any possible fire sources.
- 3). Pour a small amount of acetone onto the stained surface, while the polyester resin is still wet. Let the acetone soak the resin for a moment, so that the resin dissolves. If you are removing resin from an object, you can pour acetone into a bucket and immerse the object in the bucket. When finished, save the used acetone for another project.
- 4). Wipe up the surface with another clean rag. If any wet resin remains, treat with acetone again.
- 5). Examine your workspace for any hardened polyester resin and apply acetone to these areas as well. If the acetone has no effect on the resin once it has set, you will need to use another solvent to weaken the resin bond, such as trichloroethane.
- 6). Dispose of the rags or soak them in acetone to remove the polyester resin.
Source...