How to Refill a Swiffer WetJet
- 1). Grasp the old bottle inserted into the Wet Jet liquid cleaner mounting area. Pull the bottle straight out of the mounting area.
- 2). Line up the arrow printed on the label of the new cleaner bottle with the pole on the WetJet. Insert the bottle into the mounting area, pushing firmly until it locks into place and punctures the cap. Note that you should leave the puncture cap intact before you install the bottle. The cap opens automatically when you insert the bottle properly.
- 3). Pull the old WetJet pad off the bottom of your Swiffer, if necessary. The pads stick to the WetJet, so you only need to pull to remove it. Discard the old pad. Line up the printed side of a new pad with the base of the WetJet and press it in place.
Source...