How to Work a Back Up Camera in an Escalade EXT
- 1). Turn on your engine and make sure the Escalade is in "Park." Press the "Config" button beneath your navigation screen, and then touch "Display" on the screen.
- 2). Press the button (on the touchscreen) labeled "Rear Camera Options." Press the section labeled "Video" to turn on the back-up camera.
- 3). Put your foot on the brake and shift into "Reverse." Watch the navigation screen closely. After about 10 seconds (there is a slight delay), the navigation screen will change to rear camera mode (the message will say "Check Surroundings for Safety").
- 4). Look closely at the screen. The area displayed on the screen is right behind the rear bumper. Make sure nothing is behind you, and then back up.
- 5). Shift into "Drive" or shift back into "Park" to change the display back to the navigation screen (the back-up camera only displays in "Reverse").
Source...