Tow Prepping

• 1). Check that the Jeep Wrangler engine is turned off. If it is not off, turn it off.
  
  
• 2). Press the brake petal and shift the automatic transmission into neutral. Depress the clutch if driving a manual transmission.
  
  
• 3). Shift the transfer case into "N" (Neutral) and start the engine.
  
  
• 4). Place the automatic transmission into drive. If driving a manual transmission, put it into gear.
  
  
• 5). Move your foot off the brake pedal. There should be no vehicle movement.
  
  
• 6). Turn your Jeep Wrangler off and put the ignition to the "ACC" position.
  
  
• 7). Shift the automatic transmission into park and apply the parking brake.
  
  
• 8). Attach the vehicle tow bar, then release the parking brake.
  
  
• 9). Disconnect the negative battery cable and stow it safely.
  
  

Returning To Operating

• 1). Check that the engine is off.
  
  
• 2). Shift into neutral. Press the clutch if driving a manual transmission.
  
  
• 3). Shift the transfer case into 2H or another desired setting.
  
  
• 4). Start the engine and put the transmission into drive. If driving a manual transmission, release the clutch after starting the engine.