How to Set the Clock on the iHome
- 1). Set for Daylight Savings Time (DST), if applicable, by adjusting the "DST Switch" on the bottom of the unit; adjust the time zone by pressing and holding the "Time Zone" button until the display flashes, then pressing the "Select UP/FF" or "Select Down/Rew" button until the desired time zone is selected. Press the "Time Zone" button a second time to exit the time zone setting mode.
- 2). Press and hold the "Time Set" or "Clock Adjust" button for 2 seconds. This button is usually located on the top or bottom of the unit. The display should begin flashing, indicating that the time can be set.
- 3). Press and hold the "Hour Set" button. The current hour will presently be displayed. Press the "Sleep/Minute Set" button to adjust the minute time. If your unit does not contain these buttons, press the "Select UP/FF" or "Select Down/Rew" button until the correct time is displayed.
- 4). Press the "Time Set" or "Clock Adjust" button again to confirm the clock time setting. Listen for 2 beeps or otherwise make sure that the display ceases blinking; this indicates the clock time is set.
Source...