How to Use a Polaris Vacuum
- 1). Clean the pool filter and pump basket prior to use of the Polaris vacuum cleaner.
- 2). Connect the vacuum hose to a standard hose and connect the attached hoses to the pool suction hose.
- 3). Set the Polaris vacuum onto the pool and turn the power switch on the power cord to "On."
- 4). Monitor the vacuum occasionally to make sure the cleaner is moving back and forth and pivoting to the right and left as needed.
- 5). Turn off the power and remove the vacuum cleaner for periodic cleaning and maintenance. Wipe the bottom plate free of any debris and lift off the top housing. Clean the propeller and wipe the flow regulator.
- 6). Empty the pool pump basket and filter on a regular basis to help ensure proper vacuum performance and suction. Allow the pool filtration system to run for five minutes before reconnecting the Polaris vacuum.
Source...