How to Maintain Inground Swimming Pools
- 1). Use a chemical test strip to test the chemicals in your inground swimming pool water. All tests are a little different, so follow the manufacturer's instructions carefully. Once you complete the test, compare the colors to the color chart that came with the strip. This will tell you what chemicals need balancing.
- 2). Balance the chemicals in your inground swimming pool. Depending on the results of your test strip, you should add chemicals to the pool water following the manufacturer's instructions. Again, all chemicals will be a bit different. For example, the test strip may have revealed that your inground swimming pool has a concentration of algae. A balanced chlorine level will eliminate this issue.
- 3). Use a pool skimmer to skim debris and organic materials from your inground swimming pool water every day. Inground pools can get a quick buildup of leaves, insects and other materials, so this type of maintenance is very important.
- 4). Brush the sidewalls of your inground swimming pool with a nylon brush as needed. This can clear away debris and algae buildup if that is an issue in your pool.
- 5). Use a pool vacuum to clean the bottom of your inground swimming pool after brushing the walls or once a week. The pool vacuum can be placed at the bottom of the pool before turning it on. Stand on the deck and use long strokes from one end of the pool to the other for best results.
- 6). Empty the skimmer basket of your inground swimming pool as needed. Organic matter and other debris can build up inside the skimmer basket, so it needs to be emptied periodically.
- 7). Backwash your pool's filter by turning it off and selecting the backwash mode. Getting to this mode will be different for all filters, so read the manufacturer's instructions carefully. The filter should backwash for at least two to three minutes. Then, you should turn it to rinse mode for at least ten seconds before turning it back on.
Source...