How to Finish Brazilian Cherry
- 1). Sand the Brazilian cherry, using a palm or power sander, stocked with a low, 120-grit sandpaper. Sand along with the Brazilian cherry wood grain until the finish looks dull.
- 2). Replace the 120-grit sandpaper with 220-grit. Sand the Brazilian cherry until it feels smooth.
- 3). Wipe sawdust from the Brazilian cherry, using sticky tack cloths.
- 4). Protect the areas beneath the Brazilian cherry by covering them with drop cloths.
- 5). Coat the Brazilian cherry with an oil-based stain, using a paintbrush specifically engineered for use with coatings that have an oil base. Apply a thin coat of oil-based stain to avoid excessive runs.
- 6). Wipe the wet stain from the Brazilian cherry, using cloth rags. Wait a minimum of four hours for the fresh stain to dry. Skip this step if you want a glossy, varnish finish only.
- 7). Wash your paintbrush with mineral spirits.
- 8). Coat the Brazilian cherry with varnish, using the clean paintbrush. Wait no less than four hours for the finish to dry.
Source...