How to Build a Luke Skywalker Lightsaber
- 1). Remove the round dish from the top of the flash tube with a Philips head screwdriver.
- 2). Cut a windshield wiper blade or rubber grips into 3-inch pieces.
- 3). Use superglue to attach the blade or grips vertically to the bottom sides of the tube. Space the rubber half an inch apart. Cover the bottom of the tube.
- 4). Apply superglue to top of the raised rectangle piece. Place the flat beads side by side across the piece.
- 5). Use the super glue to attach the D-ring to the bottom of the tube. You don't use the screws that may come with the ring.
- 6). Wait for the glue to dry completely before handling.
Source...