• Master Mechanic cordless power tools are sold by True-Value hardware stores and online through various merchants. The cordless tools require a battery and battery charger that are sold separately. Master Mechanic Cordless Tools have been manufactured in 12 volt, 14.4 volt, 18 volt and 24 volt designs with current focus on the 18 and 24 volt tools, although some 12 and 14.4 volt tools are still available.
  
  

18 Volt Cutout Tool

• The Cutout Tool is similar to the Rotozip. Much like a small router, the cutout tool operates at 23,000 RPMs and uses a rotary blade similar to a drill bit to cut. It sells for about $33.00 retail as of September 2010.
  
  

18 Volt 3/8-Inch Angle Drill

• Angle drills are the go-to tool when you can't reach into a spot with a regular drill and bit. The Master Mechanic 18 volt cordless angle drill has a 3/8-inch keyless chuck placed at a 90-degree angle to the body, a variable speed trigger and a no-load speed of 900 RPMs. The retail price is $61.49.
  
  

18 Volt 3/8-Inch Drill

• The 18 volt variable speed drill is reversible and has two speed settings selectable by a slide switch for 0-450 RPM and 0-1300 RPM speeds. The keyless chuck has a variable clutch selector to prevent over driving screws in various materials. The drill provides up to 203 inch-lbs. of torque. Retail price is $61.99.
  
  

18 Volt Reciprocating Saw

• The 18 volt reciprocating saw has a variable speed of 2400 strokes per minute with its trigger switch. The split, magnetic steel motor operates at 2400 RPMs to provide a cutting depth of up to 3 inches in various materials. Retail price is $65.29.
  
  

18 Volt Circular Saw

• The circular saw comes in two sizes, 5 1/2 inch and 6 1/2 inch, which operate at 3800 and 3200 RPMs. The spindle has a trigger lock for fast blade changes. The cutting depth is a maximum of 1 1/2 inches on the 5 1/2-inch and 2 1/2 inches on the 6 1/2-inch models. The saws come with an edge guide for long, straight cuts and have dust collector ports. The retail price is $75.69 and $125.69 respectively.
  
  

18 Volt 1/2 Inch Hammer Drill

• The 1/2-inch hammer drill with keyless chuck is primarily for drilling in concrete or masonry using masonry hammer drill bits. With two speed settings and a 24-stage adjustable torque clutch, this drill provides plenty of power with a maximum 203 inch-lbs. torque. The drill provides variable speeds with 0 to 450 RPMs and 0 to 1300 RPMs, corresponding to 0 to 7200 and 0 to 20,800 beats per minute. Retail price is $85.29.
  
  

18 Volt Impact Driver

• The impact driver is used for removing or installing nuts and bolts without damaging them. Using a variable trigger, the speed can be varied from 0 to 2300 RPMs and the power head rotates a full 360 degrees. The driver has a trigger-operated light and comes with a 1/4-inch hex chuck and two driver bits. The retail price is $80.69.
  
  

18 Volt Battery

• Master Mechanic cordless tools do not come with a battery or charger, which are sold separately. This battery provides power to all 18 volt tools sold under the Master Mechanic brand. 18 volt batteries retail for $28.00.
  
  

Smart Charger

• Batteries require charging. If you have more than one battery size for your Master Mechanic cordless tools, the Smart Charger will provide charging for your 14.4 volt, 18 volt and 24 volt batteries. The Smart Charger retails for $28.29.