How to Mount Art Prints with Spray Adhesive
- 1). Take the materials outside if possible, or open windows to allow for good ventilation.
- 2). Place the print on the surface that it will be mounted on, and align it in place.
- 3). Use a pencil to mark small dots on the mounting surface at each corner of the print.
- 4). Wipe down the surface that you will be mounting the print to, as well as the back of the print. Dampen a cotton cloth with cold water and wipe the materials until all dirt and dust has been removed.
- 5). Allow the surfaces to air-dry.
- 6). Place the print face-down and spray the adhesive once onto each of the back corners. Only spray each corner for two seconds, so as to not damage the print.
- 7). Hold on to the print by its sides. Do not touch the corners that the adhesive has been applied to.
- 8). Align the print with its mounting location in mid air until you are certain that it is inside of the pencil marks that you previously made.
- 9). Place the print within the pencil marks, and press down on each corner where the adhesive has been applied to secure the print in place.
Source...