How to Properly Assemble and Hook Up a Pool's Pump & Filter
- 1). Create a level spot to place the pool pump and filter using paving stones and a leveling tool. The pool filter should be no more than 3 feet away from the pool pump to ensure maximum efficiency.
- 2). Install the pool pump by attaching it to the pool skimmer. Use a piece of pool hose and connect the outlet valve on the bottom of the pool skimmer to the inlet valve on the left side of the pool pump. Secure the hose on each end using two hose clamps; tighten each hose clamp using a screwdriver.
- 3). Attach the pool filter by connecting it to the pool pump and pool sidewall jet. Use another piece of pool hose to connect the outlet valve on the pool pump to the inlet valve on the left side of the pool filter. Secure the ends of the pool hose using two more pool hose clamps.
- 4). Use a final piece of pool hose and connect the pool filter outlet valve to the pool return jet, which is located on the side of the pool. Secure both ends of the hose using two hose clamps. Ensure all hose clamps are secure and tight to prevent any possible leaks. The system is now ready for use.
Source...