How to Use a Belkin TuneCast Auto
- 1). Press the "Tune" or "Seek" buttons on your radio until you find an FM station which has a weak or no signal. You can also use a radio that uses a dial tuner but it's more difficult to determine which station you're on.
- 2). Plug the Belkin TuneCast Auto into the bottom charging dock on the iPod or iPhone. If you want to charge your music player, plug in the other end of the device into the cigarette lighter. The Belkin TuneCast powers on automatically as soon as it detects a connection to the iPod or iPhone.
- 3). Search for the station you set your car radio to in Step 1 on the Belkin TuneCast Auto. Press the up and down buttons to change the station on the device. You can program up to two stations into the TuneCast for later use. Press the "MI" or "MII" button and hold it for 2 seconds or until the label starts to blink green. After the device is programmed, you can simply click "MI" or "MII" to turn the device to that station automatically.
- 4). Search for a song or Playlist on the iPod or iPhone and press "Play." Turn the volume on your music player to medium. Adjust the volume on the radio to whatever level is desirable.
Source...