DIY Tarp Shelter Conduit
- 1). Sand the inside of each opening on every coupling. Sand the outside of each end of every PVC pipe. Wipe away the dust and debris with your rag.
- 2). Prime one end of each of the 3 inch pipes. Apply primer inside each of the openings on your 4-way coupling. Place a layer of glue over the primer on the pipes. Slide a 3 inch pipe into each opening on the 4-way.
- 3). Prime and glue the free end of each 3 inch pipe to its own 45 degree coupling. Be sure to point all 4 of the 45 degree couplings downward.
- 4). Attach a 7 foot pipe into the open end of each 45 degree coupling. Glue a bi-directional, 3-way coupling onto the bottom end of each 7 foot pipe. Connect the open ends of the 3 way couplings with a 4 foot pipe between each pair.
- 5). Apply a strip of 2 sided tape to the outside of each of the 7 foot pipes. Wrap the tarp around the frame and press it into the tape. Leave one end of the tarp free to use that opening as a doorway.
Source...