A History Of Crest Whitening Strips And 3D Crest Whitestrips

105 11
WHAT IS CREST TOOTHPASTE?

Crest is mainly a brand of toothpaste manufactured by P&G. primarily it was produced in Germany and US, later it became successful in achieving the global sell.

Our regular tooth paste uses fluoride as its major composition, but crest introduced the use of stannous fluoride (or Tin(II) fluoride) for the first time. Stannous fluoride is basically a composition of SnF2. Teeth is prone to the bacteria generated acid attacks, but Stannous fluoride increases the resistant power and unlike fluoride, it remains effective for a long time strengthening the tooth enamel. Though fairly expensive this is simply most excellent for the teeth health.

However the strips mainly contain - Water, Glycerin, Hydrogen Peroxide, Carbomer 956, Sodium Hydroxide, and Sodium Saccharin.

CREST WHITE STRIPS - A BRIEF INTRODUCTION

Crest whitestrips was first introduced in 2001 in US. Within a short period of time it grabbed the market and earned the rank of NUMBER-1. The product generally contains a whitening gel, which can be placed directly on to the affected area for the best result. It comes under the wrap of a disposable plastic strip which is specially designed for a €one - time - use€.

In 2010, a new range was launched by the producer with the name of 3D Crest whitestrips. These are nothing but an advancement of the same. However you can never coin it's the old wine in a new bottle. Non - slippery nature, more teeth whitening capacity the size being much more are some of its noticeable addition.

Moreover the US dentist have introduced the a specialized clinical treatment with the help of which 80% more effective treatment can be obtained in compared to the retail counterparts. It is needless to mention that this process is well expensive and not at all pocket friendly.

USAGE -

Crest white strips come in two packets - one for the upper teeth and the other for the lower teeth.

€ You must not carry out the application for both upper and lower teeth once at a time.
€ Brush your teeth properly and let it dry completely.
€ Remove the seal of the upper strip, apply the gooey side over your teeth, and fold the remaining portion properly inside your mouth. It will ensure the fixation.
€ Leave it at least for 30 minutes for the best result.
€ Wipe out your mouth if needed.
€ Repeat the same process for the lower pair too after giving a gap of 1 - 2 minutes.

This process can be repeated once in two months. However the frequency of the repetition may increase depending on the stains. Some even apply the process two times, just one after the other.

PRO - EFFECTS OF THE TREATMENT -
After you apply the whitening strip, you must keep it in mind that smoking or drinking or even eating something is a STRICT €NO€ while wearing them. However according to some sleeping is also included in the restriction list, but the fact is in ambiguity.

For the total effect the usage must be made twice a day at least for 10 days.

SIDE EFFECTS AND CAUSE OF DISCOMFORT -

€ After the removal of the seal, a bleaching effect is visible in the fingers, which may cause irritation and discomfort. So, washing off the hands is a MUST after the application.
€ Apart from the latest 3D version, the other rolls out in the mouth getting in contact with the gums. Re-fixation using finger is not quite comfortable.

LASTING EFFECT -

A proper and €as - instructed€ €one time€ application remains effective at any rate for 60 days, after which the process can be repeated on need.

Being a new addition, it can be tried out for a flawless white smile!!
Source...
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.