Welding Safety Harnesses
It is not uncommon to find that a large number of welders spend a lot of time welding in the air.
Where this is the case, the use of welding safety harnesses is imperative.
They are used to protect the worker from danger by protecting against falls from significant heights.
Safety harnesses are usually made from rope or nylon webbing tied around the waist and used in securing a person to a piece of rope or an anchor point.
The importance of wearing a one of these when conducting welding in the air cannot be overemphasized.
Under no circumstances should a welder undertake welding activities in the air or on a high platform without the use of a safety harness.
These harnesses come in different types and what harness type a welder uses will usually depend on the level of work to be performed.
The FP Pro Harness with Qwik-Fit buckles and Hip D-Rings come with chest straps and are comfortable because they are lightweight.
There are others which have chest straps alone and some which have both chest straps and buckles.
An important part of safety harnesses is their webbing.
Most webbings are manufactured with nylon.
The problem with nylon is that is can be flammable, easily getting burnt by sparks from welding.
It is therefore strongly recommended that measure be taken by a wearer to protect the harness from burns.
Since most of the damage from burns is usually found on the leg, shoulder and waist webbing straps, measures should be taken to protect those areas from burns.
In protecting the webbing of a safety harness, an apron could be won over the harness by the wearer, to serve as a barrier between the nylon and the sparks which are a result of the welding operation.
Another protective measure would be to fit leather protection pieces to the harness straps at the vulnerable areas, that is, the shoulder, leg and waist.
The welding safety harness is an important aspect of welding safety, the failure of which has been responsible for many work related injuries.
Before picking up one of these harnesses, it is important to make sure that the particular choice of harness meets all OSHA requirements and standards.
One way to be sure that you are getting a quality safety harness is to buy your harness from a reputable source.
Badly manufactured harnesses can cause a lot of trouble to the wearer and by extension, to the company of firm that employed the wearer.
A safety harness should come with clear and legible instructions from the manufacturer and should also contain maintenance instructions.
Do not compromise on your safety or on the safety of your workers.
Buy quality welding safety harnesses made by manufacturers who have a reputation for abiding by safety rules and regulations.
Where this is the case, the use of welding safety harnesses is imperative.
They are used to protect the worker from danger by protecting against falls from significant heights.
Safety harnesses are usually made from rope or nylon webbing tied around the waist and used in securing a person to a piece of rope or an anchor point.
The importance of wearing a one of these when conducting welding in the air cannot be overemphasized.
Under no circumstances should a welder undertake welding activities in the air or on a high platform without the use of a safety harness.
These harnesses come in different types and what harness type a welder uses will usually depend on the level of work to be performed.
The FP Pro Harness with Qwik-Fit buckles and Hip D-Rings come with chest straps and are comfortable because they are lightweight.
There are others which have chest straps alone and some which have both chest straps and buckles.
An important part of safety harnesses is their webbing.
Most webbings are manufactured with nylon.
The problem with nylon is that is can be flammable, easily getting burnt by sparks from welding.
It is therefore strongly recommended that measure be taken by a wearer to protect the harness from burns.
Since most of the damage from burns is usually found on the leg, shoulder and waist webbing straps, measures should be taken to protect those areas from burns.
In protecting the webbing of a safety harness, an apron could be won over the harness by the wearer, to serve as a barrier between the nylon and the sparks which are a result of the welding operation.
Another protective measure would be to fit leather protection pieces to the harness straps at the vulnerable areas, that is, the shoulder, leg and waist.
The welding safety harness is an important aspect of welding safety, the failure of which has been responsible for many work related injuries.
Before picking up one of these harnesses, it is important to make sure that the particular choice of harness meets all OSHA requirements and standards.
One way to be sure that you are getting a quality safety harness is to buy your harness from a reputable source.
Badly manufactured harnesses can cause a lot of trouble to the wearer and by extension, to the company of firm that employed the wearer.
A safety harness should come with clear and legible instructions from the manufacturer and should also contain maintenance instructions.
Do not compromise on your safety or on the safety of your workers.
Buy quality welding safety harnesses made by manufacturers who have a reputation for abiding by safety rules and regulations.
Source...