Applications

• The Millermatic 210 helps you perform MIG welding and flux cored processes. You can use this machine for the following applications: farm/ranch, auto body, industrial work and light fabrication. Vocational and technical schools can also use this as a teaching tool. This welding machine comes with an operation and setup video, which is especially helpful for schools trying to teach welding students.
  
  

Dimensions

• The dimensions of this machine are 32 inches high by 19 inches wide by 39 inches deep, and it weighs 200 lbs. In just one pass, it can weld items between 22 gauge and 3/8 inches thick. It can handle stainless and mild steel objects between 0.023 inch and 0.035 inch in diameter, and it can handle flux cored objects between 0.030 and 0.045 inch in diameter. The maximum rated input amps are 27 amps and the maximum rated output amps are 6.5 amps. The machine comes with a 10-foot-long clamp and work cable and 250 amp M-25 MIG gun, which is 12 feet long. It also comes with a plug and industrial power cord and extra contact tips.
  
  

Features

• The wire speed on the Millermatic 210 is between 35 and 700 inches per minute, and it has a welding amperage range between 30 and 210 amps. It comes with dual gas solenoids, a flow gauge and an argon mix regulator. It has a cable and gun hold on the side of the machine. The consumables compartment is located under the left-hand side panel. The welding machine features a thermal-overload protection feature, which will turn the machine off if it starts overheating. It has a dual-gear drive system, which is made of cast aluminum. The control panel is located on the front of the machine, and it has control buttons for power, voltage and wire speed.
  
  

Warranty

• You receive a 90-day warranty on workmanship and parts, and a three-year warranty on the welding machine. You receive a five-year warranty on the main power rectified parts. Always keep your proof of purchase to qualify for warranty service.