Start Up

• 1). Get a water sample from the swimming pool and take it to an authorized Baquacil dealer for testing.
  
  
• 2). Add Baquacil Metal Control if the pool water contains metals. For every 2 ppm of metals in 10,000 gallons of water, add 1 bottle and let the water circulate for 8 to 12 hours.
  
  
• 3). Add Baquacil Sanitizer and Algistat to the pool water to bring the level to 50 ppm.
  
  
• 4). Add 1 gallon of Baquacil Oxidizer for every 10,000 gallons of pool water.
  
  
• 5). Add 2 pints of Baquacil CDX for every 10,000 gallons of pool water.
  
  
• 6). Dip a Baquacil Test Strip in the water for one second, hold the strip up for 15 seconds and check the color against the guide on the Baquacil Test Strip bottle to check if you have the correct levels of products. Add more of the products if necessary.
  
  

Routine Care

• 1). Use the Baquacil Test Strip to check the levels of products in the pool water every week.
  
  
• 2). Add Baquacil Sanitizer and Algistat if the level falls below 40 ppm to get it to reach 50 ppm.
  
  
• 3). Add 1 quart of Baquacil Oxidizer to the pool for every 10,000 gallons of pool water.
  
  
• 4). Add 1 pint of Baquacil CDX to the pool skimmer for every 10,000 gallons of pool water.