How to Easily Install a Car Alarm
- 1). Examine your car alarm diagram and choose the elements you want to utilize. Wrap the wire on the unit for each unwanted element around a coated paper clip and tape the wire in place.
- 2). Open your car hood and choose a place to mount the alarm's siren. The spot should be difficult to reach to prevent theft.
- 3). Remove the wiring panel in order to access the plug-in point for the alarm. Connect the positive and negative wiring for the main unit to the power wiring in the car.
- 4). Pass the wiring from the main unit through the hole in the firewall. This will allow you to connect the siren to the wired unit.
- 5). Mount the main unit and siren utilizing a power drill and screws. Attach the alarm sensors through the center of the car, near to the ground, also with screws.
- 6). Connect the pin switches to the nearest accessible wires where you want to wire for alarms, like doors and windows. This includes switch wires behind the wiring panel and the low courtesy lights along the floor of the car.
- 7). Follow the polarity of the wiring to which you want to connect the pin switch and use the appropriate wire from the switch to make the connection and sensitize the car.
- 8). Connect the siren and main unit wiring together and activate it with the included remote. Replace any parts that you had to remove in order to install the alarm.
Source...