How to Clean a Lint Brush
- 1). Dampen the cloth in warm water. Wring out thoroughly. The cloth should be moist, but not wet.
- 2). Gently rub the cloth over the lint brush, barely touching it. This will remove large pieces of debris.
- 3). Tear off about 2 inches of masking tape. Place the non-sticky part on two fingers. Wrap the tape around to attach the ends, forming a tape loop.
- 4). Place your first two fingers inside the tape loop. The sticky parts will be on the bottom and top of the fingers.
- 5). Use the tape loop to remove lint from the brush. Begin at the top of the brush and press down firmly. The tape will lift the debris. Continue this process until the brush is clean. Use additional tape, if necessary.
Source...