People who own brand-new houses or bought a unit in a condominium want to add a character to bare walls.
Even with minimalist enthusiasts, they want to place at least a piece of decoration on the wall, be it a single picture, painting, sculpture, emblem, or a display of colorful lights.
For more traditional homes, they can have the wall painted with custom designs.
However, many opt for the easier method-putting wallpaper on the walls.
A common material for interior design, wallpaper is a paper material that can be used to beautify the interior walls of rooms, houses, and offices.
Wallpapers are available in all home improvement stores and are sold in rolls.
People can choose between plain wallpaper, which can be painted afterward, or pre-printed ones with patterns and designs.
The proper installation of wallpapers is crucial to avoid imperfections.
While they are beautiful, a flaw in the installation is easily highlighted.
Flaws include tears, misaligned patterns, air bubbles, and stains.
So how do you properly install, say, a wallpaper with a fleur de lis wall art motif? Here are some tips 1.
The first step is to prepare the wall itself.
Arguably, this is the most important step.
The wall should be completely smooth, otherwise bumps and crevices will show through the paper.
Too make sure that the wall is dry and clean.
If the wall is wet, it will reduce the stickiness of the wallpaper paste since the adhesive is usually water based.
For the same reason, the wall should also be clean.
2.
If the wall is covered by old wallpaper, the old wallpaper should be removed.
You can do this by perforating and scraping the old wallpaper, brushing water on it so that the old glue will dissolve, use a commercial wallpaper remover, or use steam.
All traces of the old wallpaper should be cleared.
3.
You will want the paper to hang straight.
Therefore, divide the wall into sections.
It would be easier for you if you would mark the divisions with a pencil.
The mark will serve as a guide.
Measure each section so you would know the amount of wallpaper you need.
Cut the paper to the right size according to the measurements.
It would be wise to add a few inches to the measurement to ensure that no bare space would show.
3.
Put the first strip on top of the wall.
Apply the glue to each subsection as you work your way down.
If the wallpaper you are using has a self-adhesive backing, peel back the wax paper little by little.
As you work your way down, get rid of any air bubbles by pressing the paper firmly against the wall.
Try to keep the paper straight until you reach the bottom.
4.
When you start working on the adjacent section, make sure the fleur de lis wall art symbols align with those of the previously installed section.
By aligning them, the wall design will have a seamless, natural look.
5.
Once the sections are installed and dry, remove hand stains by wiping the wallpaper with a damp cloth, followed by a dry cloth.